2D Toolkit Forum
2D Toolkit => Support => Topic started by: Raviede on April 02, 2014, 10:40:43 am
-
I have this overlay -> (http://i57.tinypic.com/vdfxuo.png) which needs to disappear in a circular fashion and I tried using clipped sprite. But unfortunately I can only clip it starting from the sides. Is it possible to clip it like the overlay in this picture -> (http://i57.tinypic.com/x6j80o.png) ?
-
The clipped sprite doesn't support circular shapes at the moment. Someone contributed some code in the private support forum, but the link is now dead.
-
Noooo! Might there be another way of doing this instead of clipped sprite? Thanks for the reply!
-
You could write a shader to do it, but it'll probably be easier to modify the clipped sprite code to do it.
-
I see. Thanks again!
-
Any progress on this? I will really need something like this!
-
Same here. I really need this.
Is there some code sample for the clipped sprite?
-
Guys - check this thread out: http://2dtoolkit.com/forum/index.php/topic,3629.msg18885.html
It works fantastically, the only thing is I can't get it to progress in the other direction.
-
The link doesn't work?
"The topic or board you are looking for appears to be either missing or off limits to you."
-
Try this one :
Edit: Link removed - don't share links containing tk2d source outside the private forum.
-
This is great, thank you!
Now I just need to fiddle with it to invert it and make it start from an arbitrary angle.
-
theschnuffel, if you manage do you mind sharing? Thanks!
-
Its in this thread here. Look for the dropbox link
http://2dtoolkit.com/forum/index.php/topic,3629.msg18885.html
-
Its in this thread here. Look for the dropbox link
http://2dtoolkit.com/forum/index.php/topic,3629.msg18885.html
I couldn't open the thread.
I got "The topic or board you are looking for appears to be either missing or off limits to you."
-
You need to register your copy. Instructions here -
http://2dtoolkit.com/forum/index.php/topic,34.0.html
-
So, this is not an official feature yet?
-
No it isn't, and I don't think it'll ever be as all my time on this project is used up for support.